Vendor: ALOAQUA
Type: Accessories
Price:
140.93
Rain water drained from roofs and traffic areas are one of the main sources for contamination of surface water, groundwater and soil. The main pollutants, such as heavy metals and petroleum-derived hydrocarbons as well as polycyclic aromatic hydrocarbons are often present in rainwater in the form of dissolved molecules which are not effectively separated by traditional filter systems and rainwater retention basins.
The following parameters must be taken into consideration while constructing such fixed bed adsorber:
- pH-range of the water to be treated: 5 – 10
- Fill level of the Adsorption medium: min. 0.2 m, max. 5 m
- Filter speed: 5 – 20 m/h (optimum: 10 m/h)
- Contact time, with empty receptacle: at least 2.5 min.
PLURAFIT PF 300 SUB-T + R is a substrate for the removal of arsenic, phosphorus, heavy metals and organic contaminants (mineral oils) based on iron hydroxide as part of rain water run-off treatment. The substrate is poured into the substrate cartridge 300 PF-SUB C. PLURAFIT substrate PF 300 SUB-T + R is able to remove substances dissolved in water through adsorption and to retain them permanently. Its high capacity for the above contaminants results in a long filter life and thus an optimal cleaning performance with minimal investment yield.
Recommendation for substrate life time in m³ in years ( with 100m² and 500 mm rainfall / year
Effluent from :
- Uncoated metal roof 301 6
- Metal roof, copper 65 1
- Metal roof, Zinc 33,5 0,5
- inner city traffic zone 347 7
- Material: Iron (III) oxide-hydrocide FeO(OH), Fe(OH)3
- Purification of road runoff water
- Purification of drain water from metal surfaces
- Long lifetime
- Is also used in DIBT (German Institute for Building Technology) approved facilities
- Based on iron hydroxide
- Adsorption capacity:
- Arsenic, As: 7 – 9 g/kg
- Zinc, Zn: 8 – 10 g/kg
- Phosphorous, P: 12 – 16 g/kg
- Copper, Cu: 6 – 8 g/kg
- Petroleum-derived hydrocarbons: approx. 20 g MKW/kg
Vendor: ALOAQUA
Type: Accessories
Price:
12.55
PLURAFIT Pipe connector for pipes with external diameter of 104 to 110 mm to connected to the PLURAFIT spigots.
- Dimension: (Ø x L): 127 x 125 mm
- Material: PP, TPE
- Incl. lip seals
- Water proof pipe connections
Vendor: ALOAQUA
Type: Sealer
Price:
48.95
PLURAFIT PF 300 Seal special adhesive is used when the PLURAFIT basic components need to be sealed together.
The surfaces of the sealed area must be treated with the provided primer for long lasting and permanent bonding with the gummy adhesive. Traditional silicone-based adhesives do not provide a secure bonded joint on PP and PE plastics.
The quantity of one tube is sufficient for approx. 2 joints (Ø5mm) of 315 mm diameter.
- Material: MS-Polymer
- Volume glue: 85ml
- Volume primer: 10 ml
- Incl. primer
- Elastic seal
- Water proof
Vendor: All prices are GST exclusive
Type: Accessories
Price:
164.65
Backflushing nozzle for automatic cleaning for all PURAIN filter PR-150 up to 400.
For large filters, we recommend the backflushing nozzles to minimize the intervals of manual maintenance. The backflushing nozzle is installed in PURAIN rainwater filters behind the sieve. The mounting components required for this are included. The water required for backflushing can either be supplied manually through a tap or automatically via a time-controlled solenoid valve.
Note: The electronic control of the solenoid valve is integrated in the AQUALOOP control unit. We recommend deployment of two backflushing nozzles for PR-300 and PR-400 filters.
]]>
Vendor: ALOAQUA
Type: Accessories
Price:
65.00
Seal-150-5-12mm rubber seal, pipes can be installed in tanks and ducts with a wall thickness of 5 to 12 mm.
- Dimension: 212x35 mm
- Secure sealing and execution
- Quick mounting
Vendor: ALOAQUA
Type: Accessories
Price:
44.40
Seal-100-2-5mm rubber seal, pipes can be installed in tanks and ducts with a wall thickness of 2 to 5 mm.
- Dimension: 162x32 mm
- Secure sealing and execution
- Quick mounting
Vendor: ALOAQUA
Type: Accessories
Price:
105.01
Over time, fine particles settle at the base of the tank and form a sediment layer. In order to avoid swirling of the sediment layer by inflowing rain water, the water must be steadily supplied to the tank. The inlet calmer adds the rainwater to the tank without disturbing the sediment layer. Pumps and other parts of the system are subject to less wear and therefore have a higher durability.
- Dimensions: 349 dia x 220mm
- Separable, therefore pollutants can be removed in the installed condition
- Large, closed sedimentation chamber
- High durability by ribbing
- For protecting pumps and consumer
- To avoid swirling of sediments due to the inflow of rainwater
- UV stabilized
Vendor: ALOAQUA
Type: Accessories
Price:
51.87
Over time, fine particles settle at the base of the tank and form a sediment layer. In order to avoid swirling of the sediment layer by inflowing rain water, the water must be calmly supplied to the tank. The inlet calmer adds the rainwater to the tank without disturbing the sediment layer. Pumps and other parts of the system are subject to less wear and therefore have a higher durability.
- Dimensions: 349 dia x 220mm
- Separable, therefore pollutants can be removed in the installed condition
- Large, closed sedimentation chamber
- High durability by ribbing
- For protecting pumps and consumer
- To avoid swirling of sediments due to the inflow of rainwater
- UV stabilized
Vendor: ALOAQUA
Type: Accessories
Price:
82.81
Over time, fine particles settle at the base of the tank and form a sediment layer. In order to avoid swirling of the sediment layer by inflowing rain water, the water must be steadily supplied to the tank. The inlet calmer adds the rainwater to the tank without disturbing the sediment layer. Pumps and other parts of the system are subject to less wear and therefore have a higher durability.
- Dimensions: 349 dia x 220mm
- Separable, therefore pollutants can be removed in the installed condition
- Large, closed sedimentation chamber
- High durability by ribbing
- For protecting pumps and consumer
- To avoid swirling of sediments due to the inflow of rainwater
- UV stabilized
Vendor: All prices are GST exclusive
Type: Accessories
Price:
222.00
Expansion vessel 24 liter.
The AG 05 limits the switching frequency of the pump or pressure boosting system and also minimizes pressure surges with quick shutting consumers. The AG 05 is used with the RMF-SC 20 or RMF-SC 40.
- incl. wall bracket
- Material: stainless steel, PP, EPDM
- diameter: 260mm
- height: 440mm
Vendor: All prices are GST exclusive
Type: Accessories
Price:
101.75
Expansion vessel 5 liter
The AG 05 limits the switching frequency of the pump or pressure boosting system and also minimizes pressure surges with quick shutting consumers. The AG 05 is used with the RMF-SC 20 or RMF-SC 40.
- incl. wall bracket
- Material: stainless steel, PP, EPDM
- Diameter : 150 mm
- Height: 300 mm
Vendor: ALOAQUA
Type: Accessories
Price:
582.75
INTEWA refill unit can be used as a mains water top up for tanks. The supplemental supply unit is connected to the mains water line with a flexible pressure hose and overflow screw- in fitting. The RAINMASTER D activates a 14V DC valve when rainwater in the tank runs low. The mains water fills the tank via the required “airgap” as per NZ Building Code G12 Water supplies, Acceptable Solutions G12/AS1.
- Supplemental supply unit with fill status RAINMASTER D 24
- Complete with wall mounting clamp, funnel, discharge hose and mounting material
- Flow: 35 l/min @ 1 bar
- 65 l/min @ 4 bar
Vendor: ALOAQUA
Type: Accessories
Price:
434.75
INTEWA refill unit can be used for mains water top up for tanks. The supplemental supply unit is connected to the mains water line with a flexible pressure hose and overflow screw- in fitting. A floating switch, located in the tank, activates a 14V DC valve when rainwater in the tank runs low. The mains water fills the tank via the required “airgap” as per NZ Building Code G12 Water supplies, Acceptable Solutions G12/AS1.
- Refill unit 230 V 1/2" with floating switch
- Complete with wall mounting clamp, funnel, discharge hose and mounting material
- Flow: 35 l/min @ 1 bar
- 65 l/min @ 4 bar
Vendor: All prices are GST exclusive
Type: Accessories
Price:
15.73
The INTEWA HORIZON 1" pressure hose is specially developed by INTEWA for use with submersible pumps. Thus, the pressure hose can be easily and safely installed in one piece from the pump to the consumer without sealing the major pieces of adapter.For submersible water motor pumps or similar
- Material made of high quality EPDM Mix
- Pressure range from -0.85 to 14 bar
- Dimensions (internal / external): 12.7mm / 21 mm
- Built-in synthetic Cord insert
- Particularly weather-proof
- UV und Ozone stabilized
- Suitable for wall ducting MD 100, MD 150
Minimum order: 10 meters
]]>
Vendor: All prices are GST exclusive
Type: Accessories
Price:
12.03
The HORIZON 1/2” intake hose is specifically designed for use with the RAINMASTER ECO. This means no additional joins or pipe sealing is necessary, which in turn limits the chance of intake pressure problems at the control unit side. The HORIZON intake hose is resistant to the impact of harsh weather conditions and contamination, including degradation by UV light and ozone. It is highly flexible, twist-free, bend-proof and pressure resistant due to its reinforced inner core.
- For RAINMASTER Eco pumping and control unit, or similar
- Material – high quality EPDM rubber
- Pressure range from -0.85 to 14 bar
- Dimensions (internal/ external): 12.7 mm / 21 mm
- UV resistant
- Suitable for wall bush MD 100, MD 150
Minimum order: 10 meters
]]>
Vendor: ALOAQUA
Type: Accessories
Price:
18.50
The INTEWA 1“ SDS intake hose is specifically designed for use with the RAINMASTER Favorit pumping and control units. The intake line can be safely installed directly from the intake filter in the tank to the RAINMASTER Favorit. This means no additional joins or pipe sealing is necessary, which in turn limits the chance of intake pressure problems at the control unit side. It is produced from high quality EPDM rubber offering a pressure range from -0.85 to 1.5 bar. It is particularly robust with an integrated steel spiral-reinforcing as well as a synthetic cord insert. Other characteristics of the SDS intake line include: a narrow bending radius, UV resistance, weather-proof, and resistance to bacterial contamination. It is suitable for use with INTEWA MD-100 and MD-150 wall bushes.
- Material - high-quality EPDM mix
- UV resistant
- Suitable for wall bush MD 100, MD 150
- Internal reinforcing: Steal spiral, Synthetic cord inserts
- Operating pressure: -0,85 bis 1,5 bar
- Temperature range: -25 bis +70 °C
- Dimensions (internal / external): Ø 25.4 mm x Ø 33,4 mm
- Minimum bending radius 120 mm
- Quantity unit: sold by meter
- Roll length: max. 40 m
Minimum order: 10 meters
]]>
Vendor: ALOAQUA
Type: Accessories
Price:
90.65
The INTEWA MD-100 and MD-150 wall bushes are specially developed for rainwater harvesting. Inserted into walls, they prevent cold, damp and backwater from permeating the ductwork into the control unit installation room by sealing the pipework and electrical cabling. They feature different size holes to take both intake pressure hoses and electrical cables through walls to the control unit. Unused holes in the bushes are sealed with blind plugs. Bushes are made of stainless steel and a high quality rubber compound and are easily installed and tightened in place even if retrofitted.
- For RAINMASTER Eco and Favorit pump and control units
- Provides a protective seal against cold and damp seepage from storage tanks
- Corrosion resistant stainless steel material
- External diameter: 99 mm
- Thickness of rubber seal: 30 mm
- Stainless steal plate: 5 mm
- for pipe cross section I: 31 - 34 mm or 19 - 22mm
- for pipe cross section II: 19 mm - 22 mm
- for cable cross section I: 5 mm - 10 mm
- for cable cross section II: 6 mm - 10 mm
- Material: Stainless Steel, NBR
- Weight: 0.8 kg
Vendor: ALOAQUA
Type: Accessories
Price:
125.80
The INTEWA MD-100 and MD-150 wall bushes are specially developed for rainwater harvesting. Inserted into walls, they prevent cold, damp and backwater from permeating the ductwork into the control unit installation room by sealing the pipework and electrical cabling. They feature different size holes to take both intake pressure hoses and electrical cables through walls to the control unit. Unused holes in the bushes are sealed with blind plugs. Bushes are made of stainless steel and a high quality rubber compound and are easily installed and tightened in place even if retrofitted.
- Provides a protective seal against cold and damp seepage from storage tanks
- Very good value for money
- Corrosion resistant stainless steel material
- Includes manifold for a DN50 refill pipe
- External diameter: 149 mm
- Thickness of rubber seal: 30 mm
- Stainless steal plate: 5 mm
- for supplemental supply line: PE DN50
- for pipe cross section I: 31 mm - 34 mm
- for pipe cross section II: ---
- for cable cross section I: 5 mm - 7 mm
- for cable cross section II: 9 mm - 11 mm
- Material: Stainless Steel, NBR
- Weight: 1.8 kg
Vendor: All prices are GST exclusive
Type: Accessories
Price:
46.25
The floating suction filter ensures that the cleanest water, from just below the surface, is a drawn from the tank. Its built-in filter protects the pump as well as toilet and washing machine inlet valves, against potential contaminants. The filter mesh width is selected to ensure maintenance intervals are minimized. The brass backflow valve prevents the intake line from running dry.
- ½ " design for the RAINMASTER Eco rainwater system
- non return vavle
- incl. 2 x 1/2" brass grommets and stainless steel hose clamps
Vendor: All prices are GST exclusive
Type: Accessories
Price:
77.70
The floating suction filter ensures that the cleanest water, from just below the surface, is a drawn from the tank. Its built-in filter protects the pump as well as toilet and washing machine inlet valves, against potential contaminants. The filter mesh width is selected to ensure maintenance intervals are minimized. The brass backflow valve prevents the intake line from running dry.
- 1" design for the RAINMASTER Favorit rainwater system
- non return valve
- incl. 2 1" brass grommets and stainless steel hose clamps
]]>
Vendor: All prices are GST exclusive
Type: Accessories
Price:
164.65
The floating suction filter ensures that the cleanest water, from just below the surface, is a drawn from the tank. Its built-in filter protects the pump as well as toilet and washing machine inlet valves, against potential contaminants. The filter mesh width is selected to ensure maintenance intervals are minimized. The brass backflow valve prevents the intake line from running dry.
- 1 ½“ design for the RAINMASTER Favorit-SC duplex and triplex
- non return vavle
- incl. 2 brass grommets and stainless steel hose clamps
]]>
Vendor: All prices are GST exclusive
Type: Accessories
Price:
397.75
The RAINMASTER D 24 is a fill level indicator for water tanks of a depth up to 3 m It can be mounted in a convenient viewing place in the house. For rainwater systems using a submersible pump, the Rainmaster D 24 can automatically operate a magnetic valve, controlling the supply of mains water top-up to the tank, should the rainwater level in the tank run low.
The fill status is measured, via means of capacitance, by a sturdy PTFE Sensor cable. This is hung from the top of the tank. The setting of the respective tank water height (top and bottom) levels is done via digital calibration using two buttons on the main unit. The switching range for supplemental mains water supply by a magnetic valve is at approx. 2.5 % of the measuring range, so that the flow of mains water is only activated when required. The mains water inlet supply is time-monitored, so that any possible malfunction is prevented. A further automatic protection switch prevents the calcification of valves by regularly opening the valves, for a few seconds at a time, to clear any build-up.
- Fill level indicator for water tanks of a depth up to 3 m
- Clear LED display from 0 bis 100 %
- LED display of supplement supply point
- Supplemental supply point can be adjusted to any height
- Power supply : 24 V DC / max. 15 W
]]>
Vendor: All prices are GST exclusive
Type: Accessories
Price:
310.80
The RAINMASTER Eco-FS is a separate fill level indicator for installation in the RAINMASTER Eco. It shows the fill status of the tank. The RM Eco-FS contains the display module, the sensor system and the control line for the tank. The display module is simply installed in place of the blank panel on the front cover of the RM Eco. The connection to the RM Eco main board is done via a ribbon cable.
]]>
Vendor: All prices are GST exclusive
Type: Accessories
Price:
257.15
Charge pump to work in conjunction with the RAINMASTER ECO.
The pump boosts the intake performance of RM Eco, so that an intake level of additional 3 m can be attained.
The charging pump unit is installed at the end of the intake line. The charging pump hangs on a float and moves up and down with the level of water in the tank. Thus water is always drawn from the cleanest area, just below the water surface.
- Dimensions (L x W x H): 125 mm x 57 mm x 83 mm
- Power supply input: 24 V DC
- Power intake: 20 W
- Max. pressure height: 3.2 m
- Max. volume flow rate: 25 l / min
- Pressure connection / hose connection: ½“ AG / Ø 14 mm
- Cable length x Cross section: 5 m x Ø 5 mm
- Protection class: IP68
Vendor: All prices are GST exclusive
Type: Accessories
Price:
545.75
Charge pump to work in conjunction with RAINMASTER FAVORIT 20/40.
The charging pump unit is installed at the end of the intake line in the tank. The charging pump hangs on a float and moves up and down with the level of water in the tank. Thus water is always drawn from the cleanest area, just below the water surface.
- not suitable for RM Favorit SC
- max height: 6 m
- max volume rate: 100l / min