Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Rainwater Harvesting for a home, everything you need to collect, filter and reuse rainwater around your house. (Main tank supplied by others.)
Quick Overview
- saving of up to 100 % potable water
- more independence from potable water supplier
- suitable for showering and bathing
- ideal for retrofitting existing rainwater harvesting systems
- suitable for all types of tanks
- ideal for the supply of all consumers in the dwelling
- incl. highly efficient, self-cleaning PURAIN filter, skimmer, backflow valve and inlet calmer
- incl. fully automatic DVGW-certified RAINMASTER Favorit pump and control unit with mains water top up
- speed control, thereby 70% quieter, 40% less power consumption and 40% longer durability
- soft and low lime rainwater
- TOP quality
The package includes nearly all components for creating a perfect rainwater harvesting system except tanks and pipes, for the supply to larger dwellings and gardens. The rainwater is pre-filtered through the highly efficient PURAIN filter before it is fed to the tank. The skimmer overflow of the PURAIN filter removes the surface contaminants. The built-in backflow valve prevents the intrusion of small animals and contaminants. The inlet calmer prevents swirling of the bottom sediments. The rainwater is ultra-filtered with the AQUALOOP membrane station and routed to a clean water tank in the basement. The most economical and quiet RAINMASTER Favorit-SC draws the micro-filtered water from the clean water tank via a floating suction filter and supplies precious, clean, sterilised and lime-deficient rainwater to the water consumers such as toilets, washing machine, shower, bathtubs and garden systems. If there is not enough rainwater in the tank anymore, potable water is automatically sourced via the DVGW-tested RAINMASTER, that can be installed almost anywhere in the house.
The requirements of the EC directive "water intended for human consumption" are fulfilled, therefore the treated water can be used by private individuals (at home) for body care.
Remark
The inspection of the water quality, as well as the maintenance of the installation are the responsibility of the user. The water may only be used for your own use.
Drinking water from rainwater (House Rainwater Source)
consist off:
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Ensures that your water supply inside your house is free of bacteria and most viruses.
System is suitable for a household for up to 4 inhabitants, bigger systems are available on request. Please contact: [email protected]
System consist of:
2x 500 ltr plastic tanks, suitable for potable water (different sizes and material available)
1x AQUALOOP membrane and station including controller, sufficient to produce up to 1500 ltr of bacteria free water each day, life expectancy of up to 10 years
1x ALOAQUA Pump kit 80 ltr/min incl. accessories
The Water Treatment system Full House, consists of 2 x 500 liter tank. Dependable on the water source is it either toped up (mains water supply) or pumped via a submersible pump (bore or surface water) into the reactor tank.
An AQUALOOP membrane station including membrane and controller sterilizes the rainwater and transfers it to the adjacent 500 ltr tank. The membrane holds back 99.9999% of all bacteria and also 99.7 of all viruses.
The efficient ALOAQUA Pump kit draws the cleanest water from the tanks via a floating suction filter and supplies the water to the consumers such as showers, bath etc.
A building and/or resource consent might be required; please check with your local council.
Supply only - Installation can be arranged on request.
A range of different tank sizes and materials, including stainless steel are available on request.
- 2 x 500 ltr tank (black)
- Dimensions (Ø x H): 840 x 1257 mm
- Weight: 19 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- AQUALOOP membrane and controller
- Floating suction device with coarse filter ½”
- ALOAQUA Pumping kit
- max. working pressure: 4,5 bar
- max. flow rate: 80 l/min
- speed control
- especially durable, quiet and economical
Not included:
- mains supply water top up - Refill unit 230 V 1/2" with floating switch
or
- submersible pump including floating switches - Submersible stainless steel pump up to 250 litres min, Hmax 10 m
Please contact us for your exact requirement.
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
The Full House Rainwater Utilization and Sterilization System, for collecting, filtering and reuse rainwater for everything in the house. System produces germ free potable water.
It consists of a 7500 liter tank with a preinstalled PURAIN filter with calmed inlet. The rainwater is pre-filtered through the self-cleaning, highly efficient PURAIN filter before it is fed to the tank. The inlet calmer prevents swirling of floor sediments. The skimmer overflow of the PURAIN filter removes the surface contaminants. The built-in backflow valve prevents the intrusion of small animals and contaminants.
An AQUALOOP membrane station including membrane and controller sterilizes the rainwater and transfers it to the adjacent 500 ltr tank. The membrane holds back 99.9999% of all bacteria and also 99.7 of all viruses.
The efficient RAINMASTER Favorit 20 SC draws the cleanest water from the tanks via a floating suction filter and supplies the water to the consumers such as showers, bath etc. It switches over to mains water supply if there is not enough rainwater in the tanks. The RAINMASTER Favorit 20SC can be installed almost anywhere in the house.
A building and/or resource consent might be required; please check with your local council.
Supply only - Installation can be arranged on request.
A range of different tank sizes and materials, including stainless steel are available on request.
- 7500 ltr tank
- Dimensions (Ø x H): 2500 x 1915 mm
- Weight: 150 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- 1 x 500 ltr tank (black)
- Dimensions (Ø x H): 840 x 1257 mm
- Weight: 19 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- AQUALOOP membrane and controller
- PURAIN PF100 Filter
- Low maintenance
- sturdy design
- Mesh size: 0.8mm
- PLURAFIT inlet calmer
- Floating suction device with coarse filter ½”
- Wall bushings DN 100
- RAINMASTER Favorit 20 speed control
- max. working pressure: 4,5 bar
- max. flow rate: 80 l/min
- speed control
- especially durable, quiet and economical
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Greywater recycling + Rainwater harvesting combined in one system.
Collecting bathroom greywater (shower, sink and tub), treating it with the AQUALOOP system and transfer the treated water to the rainwater tank (2000 ltr, bigger tanks available on request). Rainwater tank equipped with PURAIN filter and calmed inlet. The quiet RAINMASTER Eco draws the cleanest water from the tank via a floating suction filter and supplies precious, clean, and soft rainwater to the consumers such as toilets, washing machine and garden systems. It switches over to mains water supply if there is not enough rainwater in the tank. The RAINMASTER Eco can be installed almost anywhere in the house.
This system is ideal for the supply of toilets, washing machines and small irrigation systems.
A building and/or resource consent might be required; please check with your local council.
- 1 x 500 ltr tank (black)
- Dimensions (Ø x H): 840 x 1257 mm
- Weight: 19 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Including AQUALOOP greywater recycling system for up to 6 inhabitants
- 1 x 2000 ltr tank
- Dimensions (Ø x H): 1500 x 1485 mm
- Weight: 50 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
- PURAIN PF100 Filter
- Low maintenance
- sturdy design
- Mesh size: 0.8mm
- PLURAFIT inlet calmer
- Floating suction device with coarse filter ½”
- Wall bushings DN 100
- RAINMASTER ECO 10
- for toilet, washing machine, garden tap and little sprinkler
- noise level: 48 dbA, medium noise emission
- max. volume flow rate: 10 l/min
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Rainwater Harvesting System for large domestic Dwellings, Hotels, Laundries, Camping Grounds, etc.. Designed to meet the requirement of the project.
- rainwater for secondary use (toilets, washing machine, irrigation)
- rainwater for shower, bath and drinking
Starting from the size of the tank/s, location and material, over the pre-filter and further treatment up to the pumping system, all sized to match each other and the purpose.
In some areas rainwater will be the only water source available and a higher water treatment will be required.
In a urban environment rainwater can be used for flushing toilets and irrigation, thus saving on water and sewage fees and minimizing the carbon footprint of the project.
A building and/or resource consent might be required; please check with your local council.
Please send an enquiry to [email protected]
We will design your system! Send us your plans.
SAMPLE SYSTEM: PURAIN 300 pre-filter, Rainwater external storage tank, 3 x RAINMASTER Favorit 40 SC Triplex pump and control units operating independently, 500 Litre intermedia tank.
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Recycling Greywater and reusing it for secondary use (toilets, washing machines, irrigation) will save on precious potable water and also on sewage.
AQUALOOP is a modular system and can be designed to treat greywater for up to 200 people. Ideal for hotels, camping grounds, town houses and commercial projects.
Please send an enquiry to [email protected]
We will design your system! Send us your plans.
Greywater from shower, sink, and tub is collected in a bio-reactor, then treated by the AQUALOOP system and transferred to a clean water tank, from where it can be used for toilet flushing, washing machine and garden irrigation. Savings on mains water and sewerage of between 30-40%. The AQUALOOP membrane station can be equipped with multiple filtering membranes.
]]>SAMPLE SYSTEM: AQUALOOP PURAIN 150/200 pre-filter, Greywater external storage tank, 4 x AQUALOOP membrane stations fitted with six membranes each, 4 x blowers, Clean water storage tank, 3 x RAINMASTER Favorit 40 SC Triplex pump and control units operating independently, with a 500 Litre expansion tank.
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Complete Greywater Recycling System for a domestic dwelling with up to 6 inhabitants.
This grey water recycling systems can be used in most single family dwellings. Approximately 2 x 500 liters of storage volume is needed for a single family dwelling. Bathroom greywater from(shower, sink, and tub is collected in the bio reactor (500ltr), treated by the AQUALOOP system and transferred to the clean water tank (500ltr), from where it can be used for toilet flushing, washing machine and garden irrigation. Savings on mains water and sewerage of between 30-40%. The AQUALOOP membrane station is equipped with one filtering membrane.
Aqualoop is a modular system and can treat water for up to 200 people. Ideal for hotels, camping grounds, town houses and commercial projects. Please send an inquiry to [email protected]
A RAINMASTER ECO 10 pump and control unit is included, to supply the treated water.
A building and/or resource consent might be required; please check with your local council.
- 2 x 500 ltr tank (black)
- Dimensions (Ø x H): 840 x 1257 mm
- Weight: 19 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Complete AQUALOOP greywater recycling system for up to 6 inhabitants
]]>
AQUALOOP is an Onsite Residential and Commercial Water Reuse Treatment certified by NSF INTERNATIONAL. The NSF certification mark on a product means that the product complies with all public health standard requirements.
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
The FULL HOUSE Rainwater Utilization and Sterilization System, for collecting, filtering and reusing rainwater for everything in the house. System produces germ free potable water.
It consists of 2 x 5000 liter stainless steel tanks (different tanks available on request) with one preinstalled PURAIN filter including calmed inlet and an AQUALOOP filtration and sterilization station. The rainwater is pre-filtered through the self-cleaning, highly efficient PURAIN filter before it is fed to the tanks. The inlet calmer prevents swirling of floor sediments. The skimmer overflow of the PURAIN filter removes the surface contaminants. The built-in backflow valve prevents the intrusion of small animals and contaminants. The AQUALOOP filtration and sterilization station, filters the water through a membrane (0.2 micron) and transfers it to a separate 500 ltr tank. The membrane ahs a life expectancy of up to 10 years. The efficient RAINMASTER Favorit 20 SC draws the water from the tanks via a floating suction filter and supplies precious, clean, and soft rainwater to the consumers such as showers, sinks and so on. It switches over to mains water supply if there is not enough rainwater in the tanks. The RAINMASTER Favorit 20SC can be installed almost anywhere in the house.
This system is ideal for the supply of all end-users in a house.
Supply only - Installation can be arranged on request.
A building and/or resource consent might be required; please check with your local council.
- 2 x 5000 ltr tank
- Material: stainless steel, 304 S/S
- Dimensions (Ø x H): 1700 x 2460 mm
- Weight: 91 kg
- Inspection lid Ø: 400
- 1 x 500 ltr plastic tank
- Dimensions (Ø x H): 840 x 1257 mm
- Weight: 19 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
- PURAIN PF100 Filter
- Low maintenance
- sturdy design
- Mesh size: 0.8mm
- PLURAFIT inlet calmer
- AQUALOOP filtration and sterilization station
- Floating suction device with coarse filter 1”
- Wall bushings DN 100
- RAINMASTER Favorit 20 speed control
- max. working pressure: 4,5 bar
- max. flow rate: 80 l/min
- speed control
- especially durable, quiet and economical
- multiple pumping system as duplex or triplex system possible
- incl. 5 meter hose 1"
Vendor: All prices are GST exclusive
Type: System
Price:
395.00
This bundle is ideal for using the collected rainwater in your tank for irrigation or similar purpose. Can be added to the basic rainwater harvesting tank range and makes your life easier. Also ideal for retrofitting to existing tanks (minimum dia 200 mm inspection lid required). The integrated floating switch ensures that the pump switches off when the water level reaches a critical low.
includes
- flexible hose 1.5 m
- irrigation connections for installation inside a plastic tank
- 1” connection for flexible hose outside the tank
- Submersible pump incl. floating switch
- 10 m electrical cable
Pump data:
- medium: pure water
- max. immersion depth: 7 m
- Operating temperature: max. 50 °C
- Electrical connection: 230 V AC/ 50 Hz
- Overload protection: integrated
- Motor data: 320 W
- Hmax: 6 m
- Qmax : 130 l/min
- Pressure port: 1 1/4“ AG
- Dimension: Ø 165 x 290 mm
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Basic 7500 litre Rainwater Harvesting System with filter.
The BASIC Rainwater Harvesting System 7500, consists of a 7500 litre tank with a preinstalled PLURAFIT filter with filter basket. The filter holds back leaves and coarse particles bigger than 1 mm and can be easily removed for cleaning purposes.
The filter is used simultaneously as an overflow. With a full tank, the basket is submerged in the water which dissolves solid contaminants and supports automatic cleaning.
This system is ideal for irrigating the garden with a simple rainwater system.
The system comes with a standard hose tap.
Supply only - Installation can be arranged on request.
7500 ltr plastic tank
- Dimensions (Ø x H): 2500 x 1915 mm
- Weight: 150 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
PLURAFIT Filter
- Simple extraction via bucket holder
- Sturdy design
- Large filter surface
- Large filter collecting space
- Mesh size: 1mm
Please check with your local council if a building or resource consent is required.
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
1.00
We design infiltration systems for run-off water from septic tanks and sewage plants. The treated run-off water from the septic tank/ sewage plant is routed into the DRAINMAX Tunnel trench for subsequent infiltration into the ground. The Tunnel trench is covered with a geotextile for protection from soil.
SUPPLY ONLY.
Pipes and earth work not included.
The size of an infiltration system is calculated depending on various parameters such as location, soil properties, etc.
Contact us for your project: [email protected]
It is with 1.6 m³ a large volume- and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is also possible to restrict the water flow to the stormwater pipe only. This technology saves significant costs on laying complex piping systems.
| 1: DRAINMAX tunnel | 5: Top layer |
| 2: Backfilling of tunnel from sides and top | 6: Sewage plant |
| 3: Filter fabric | 7: Intake of sewage water |
| 4: Tunnel cover | 8: Ground water level |
Vendor: PRICE ON APPLICATION
Type: System
Price:
1.00
We design rainwater infiltration and attenuation systems for commercial dwellings and properties. The rain- /stormwater from the connected areas is filtered by sedimentation, filtration and separator insertion upstream filter pits and then routed into the DRAINMAX Tunnel trench for subsequent infiltration into the ground. It is also possible to attenuate the water with slow release into the stormwater system. The Tunnel trench is covered with a geotextile for protection from soil.
SUPPLY ONLY.
Pipes and earth work not included.
The size of an infiltration system is calculated depending on various parameters such as roofs, soil properties, etc.
Contact us for your project: [email protected]
It is with 1.6 m³ a large volume- and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. This technology saves significant costs on laying complex piping systems. The DRAINMAX tunnel system can also be used for infiltration of effluent water from sewage plants.
| 1: DRAINMAX tunnel | 7: Sedimentation and filter pit |
| 2: Backfilling of tunnel from sides and top | 8: Flushing pit |
| 3: Filter fabric | 9: Rainwater inflow |
| 4: Tunnel cover | 10: Ground water level |
| 5: Top layer | 11: Base layer of filter fabric |
| 6: Distribution of rainwater |
Vendor: All prices are GST exclusive
Type: System
Price:
1750.00
The package includes almost all components for constructing an infiltration system for a single family dwelling. The rainwater from the connected areas is filtered by sedimentation, filtration and separator insertion in the PLURAFIT filter and then routed into the DRAINMAX Tunnel trench for subsequent infiltration into the ground. The Tunnel trench is covered with a geotextile for protection from soil.
SUPPLY ONLY.
Pipes and earth work not included.
The size of an infiltration system is calculated depending on various parameters such as roofs, soil properties, etc.
Contact us for your project: [email protected]
It is with 1.6 m³ a large volume- and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is also possible to restrict the water flow to the stormwater pipe only. This technology saves significant costs on laying complex piping systems. The DRAINMAX tunnel system can also be used for infiltration of effluent water from sewage plants
-
-
1: DRAINMAX tunnel 6: Sedimentation and filter pit 2: Backfilling of tunnel from sides and top 7: Rainwater inflow 3: Filter fabric 8: Ground water level 4: Tunnel cover 9: Biologically active layer 5: Top layer 10: Distance to the base of the building
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Basic 5250 litre Rainwater Harvesting System with filter.
The BASIC Rainwater Harvesting System 5250, consists of a 5250 litre tank with a preinstalled PLURAFIT filter with filter basket. The filter holds back leaves and coarse particles bigger than 1 mm and can be easily removed for cleaning purposes.
The filter is used simultaneously as an overflow. With a full tank, the basket is submerged in the water which dissolves solid contaminants and supports automatic cleaning.
This system is ideal for irrigating the garden with a simple rainwater system.
The system comes with a standard hose tap.
Supply only - Installation can be arranged on request.
5250 ltr plastic tank
- Dimensions (Ø x H): 2150 x 1866 mm
- Weight: 115 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
PLURAFIT Filter
- Simple extraction via bucket holder
- Sturdy design
- Large filter surface
- Large filter collecting space
- Mesh size: 1mm
Please check with your local council if a building or resource consent is required.
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Basic 2000 litre Rainwater Harvesting System with filter.
The BASIC Rainwater Harvesting System 2000, consists of a 2000 liter tank with a preinstalled PLURAFIT filter with filter basket. The filter holds back leaves and coarse particles bigger than 1 mm and can be easily removed for cleaning purposes.
The filter is used simultaneously as an overflow. With a full tank, the basket is submerged in the water which dissolves solid contaminants and supports automatic cleaning.
This system is ideal for irrigating the garden with a simple rainwater system.
The system comes with a standard hose tap.
Supply only - Installation can be arranged on request.
2000 ltr plastic tank
- Dimensions (Ø x H): 1500 x 1485 mm
- Weight: 50 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
PLURAFIT Filter
- Simple extraction via bucket holder
- Sturdy design
- Large filter surface
- Large filter collecting space
- Mesh size: 1mm
Please check with your local council if a building or resource consent is required.
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Basic 500 litre Rainwater Harvesting System with filter.
The BASIC Rainwater Harvesting System 500, consists of a 500 liter tank with a pre-installed PLURAFIT filter with filter basket. The filter holds back leaves and coarse particles bigger than 1 mm and can be easily removed for cleaning purposes.
The filter is used simultaneously as an overflow. With a full tank, the basket is submerged in the water which dissolves solid contaminants and supports automatic cleaning.
This system is ideal for irrigating the garden with a simple rainwater system.
The system comes with a standard hose tap.
Supply only - Installation can be arranged on request.
500 ltr plastic tank
- Dimensions (Ø x H): 840 x 1257 mm
- Weight: 19 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
PLURAFIT Filter
- Simple extraction via bucket holder
- Sturdy design
- Large filter surface
- Large filter collecting space
- Mesh size: 1mm
Please check with your local council if a building or resource consent is required.
]]>
Vendor: All prices are GST exclusive
Type: Aqualoop
Price:
3265.25
AQUALOOP single membrane station and controller for water treatment.
Micro filtration system for removal of 99.9999% of all bacteria and 99.7% of all viruses.
The station is vertically positioned in the contaminated water tank and is attached to the permeate hose. The membrane station is equipped with weights, in order to remain stable. The installed pump draws the water through the membrane for cleansing and sends it via the permeate hose to the clean water tank. The length of the permeate hose (see accessories Horizon ½" hose) can be a maximum of 3 m height within the tank to ensure adequate pumping pressure. The membrane is automatically cleaned (from a back-flushing container located above the pump) at regular intervals to guarantee a long, high flow operating life.
Including:
Control unit/ Membrane Station / Membrane
- built-in electrical regulation of pumps, saves energy and increases service life
- smart controller adjusts the required quantity as per the need for saving energy
- automatic back-flushing mode for low-maintenance operation
- automatic sludge disposal to minimize maintenance
- mode change of clean water storage tank
- different modes can be selected
- automatic vacation mode
- automatic display of maintenance mode
- automatic maintenance mode
- optional pressure sensor for monitoring function
- low voltage operation with small systems
- connection for controlling supplemental supply in domestic water works
Controller
A controller is provided for every membrane station. It automatically controls the AQUALOOP water treatment plant. The operating status can be easily read from an illuminated LCD display.
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Rainwater Harvesting for home and garden "System 7500" is everything you need to collect, filter and reuse rainwater around your house.
It consists of a 7500 plastic liter tank with a preinstalled PURAIN filter with calmed inlet. The rainwater is pre-filtered through the self-cleaning, highly efficient PURAIN filter before it is fed to the tank. The inlet calmer prevents swirling of floor sediments. The skimmer overflow of the PURAIN filter removes the surface contaminants. The built-in backflow valve prevents the intrusion of small animals and contaminants. The quiet RAINMASTER Eco draws the cleanest water from the tank via a floating suction filter and supplies precious, clean, and soft rainwater to the consumers such as toilets, washing machine and garden systems. It switches over to mains water supply if there is not enough rainwater in the tank. The RAINMASTER Eco can be installed almost anywhere in the house.
This system is ideal for the supply of toilets, washing machines and small irrigation systems.
A building and/or resource consent might be required; please check with your local council.
Supply only - Installation can be arranged on request.
- 7500 ltr tank
- Dimensions (Ø x H): 2500 x 1915 mm
- Weight: 150 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
- PURAIN PF100 Filter
- Low maintenance
- sturdy design
- Mesh size: 0.8mm
- PLURAFIT inlet calmer
- Floating suction device with coarse filter ½”
- Wall bushings DN 100
- RAINMASTER ECO 10
- for toilet, washing machine, garden tap and little sprinkler
- noise level: 48 dbA, medium noise emission
- max. volume flow rate: 10 l/min
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Rainwater Harvesting for home and garden "System 5250" is everything you need to collect, filter and reuse rainwater around your house.
It consists of a 5250 liter plastic tank with a preinstalled PURAIN filter with calmed inlet. The rainwater is pre-filtered through the self-cleaning, highly efficient PURAIN filter before it is fed to the tank. The inlet calmer prevents swirling of floor sediments. The skimmer overflow of the PURAIN filter removes the surface contaminants. The built-in backflow valve prevents the intrusion of small animals and contaminants. The quiet RAINMASTER Eco draws the cleanest water from the tank via a floating suction filter and supplies precious, clean, and soft rainwater to the consumers such as toilets, washing machine and garden systems. It switches over to mains water supply if there is not enough rainwater in the tank. The RAINMASTER Eco can be installed almost anywhere in the house.
This system is ideal for the supply of toilets, washing machines and small irrigation systems.
A building and/or resource consent might be required; please check with your local council.
Supply only - Installation can be arranged on request.
- 5250 ltr tank
- Dimensions (Ø x H): 2150 x 1866 mm
- Weight: 115 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
- PURAIN PF100 Filter
- Low maintenance
- sturdy design
- Mesh size: 0.8mm
- PLURAFIT inlet calmer
- Floating suction device with coarse filter ½”
- Wall bushings DN 100
- RAINMASTER ECO 10
- for toilet, washing machine, garden tap and little sprinkler
- noise level: 48 dbA, medium noise emission
- max. volume flow rate: 10 l/min
- incl. 5 meter hose 1/2"
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Rainwater Harvesting for home and garden "System 3200" is everything you need to collect, filter and reuse rainwater around your house.
It consists of a 3200 liter plastic tank with a preinstalled PURAIN filter with calmed inlet. The rainwater is pre-filtered through the self-cleaning, highly efficient PURAIN filter before it is fed to the tank. The inlet calmer prevents swirling of floor sediments. The skimmer overflow of the PURAIN filter removes the surface contaminants. The built-in backflow valve prevents the intrusion of small animals and contaminants. The quiet RAINMASTER Eco draws the cleanest water from the tank via a floating suction filter and supplies precious, clean, and soft rainwater to the consumers such as toilets, washing machine and garden systems. It switches over to mains water supply if there is not enough rainwater in the tank. The RAINMASTER Eco can be installed almost anywhere in the house.
This system is ideal for the supply of toilets, washing machines and small irrigation systems.
A building and/or resource consent might be required; please check with your local council.
Supply only - Installation can be arranged on request.
- 3200 ltr tank
- Dimensions (Ø x H): 1800 x 1558 mm
- Weight: 80 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage
- PURAIN PF100 Filter
- Low maintenance
- sturdy design
- Mesh size: 0.8mm
- PLURAFIT inlet calmer
- Floating suction device with coarse filter ½”
- Wall bushings DN 100
- RAINMASTER ECO 10
- for toilet, washing machine, garden tap and little sprinkler
- noise level: 48 dbA, medium noise emission
- max. volume flow rate: 10 l/min
- incl. 5 meter hose 1/2"
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Rainwater Harvesting for home and garden "System 2000" is everything you need to collect, filter and reuse rainwater around your house.
It consists of a 2000 liter plastic tank with a preinstalled PURAIN filter with calmed inlet. The rainwater is pre-filtered through the self-cleaning, highly efficient PURAIN filter before it is fed into the tank. The inlet calmer prevents swirling of floor sediments. The skimmer overflow of the PURAIN filter removes the surface contaminants. The built-in backflow valve prevents the intrusion of small animals and contaminants.
The quiet RAINMASTER Eco draws the cleanest water from the tank via a floating suction filter and supplies precious, clean, and soft rainwater to the consumers such as toilets, washing machine and garden systems. It switches over to mains water supply if there is not enough rainwater in the tank. The RAINMASTER Eco can be installed almost anywhere in the house.
This system is ideal for the supply of toilets, washing machines and small irrigation systems.
A building and/or resource consent might be required; please check with your local council.
Supply only -installation can be arranged on request.
- 2000 ltr tank
- Dimensions (Ø x H): 1500 x 1485 mm
- Weight: 50 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
- PURAIN PF100 Filter
- Low maintenance
- sturdy design
- Mesh size: 0.8mm
- PLURAFIT inlet calmer
- Floating suction device with coarse filter ½”
- Wall bushings DN 100
- RAINMASTER ECO 10
- for toilet, washing machine, garden tap and little sprinkler
- noise level: 48 dbA, medium noise emission
- max. volume flow rate: 10 l/min
- incl. 5 meter hose 1/2"
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Basic 3200 litre Rainwater Harvesting System with filter.
The BASIC Rainwater Harvesting System 3200, consists of a 3200 liter tank with a preinstalled PLURAFIT filter with filter basket. The filter holds back leaves and coarse particles bigger than 1 mm and can be easily removed for cleaning purposes.
The filter is used simultaneously as an overflow. With a full tank, the basket is submerged in the water which dissolves solid contaminants and supports automatic cleaning.
This system is ideal for irrigating the garden with a simple rainwater system.
The system comes with a standard hose tap.
Supply only - Installation can be arranged on request.
3200 ltr plastic tank
- Dimensions (Ø x H): 1800 x 1558 mm
- Weight: 80 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
PLURAFIT Filter
- Simple extraction via bucket holder
- Sturdy design
- Large filter surface
- Large filter collecting space
- Mesh size: 1mm
Please check with your local council if a building or resource consent is required.
]]>